kegerator conversion kit for refrigerators

[wpsm_titlebox title=”Best results for kegerator conversion kit for refrigerators” style=”4″][wpsm_toplist][/wpsm_titlebox]

Kegco Deluxe Door Mount Kegerator Conversion Kit with 5 lb. Co2 Tank EBDCK-5T

$236.52
$181.94
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body.
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually.
  • HEAVY DUTY FAUCET WRENCH: Make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them.
  • INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust! These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.

Standard Double Faucet Door Mount Kegerator Keg Tap Conversion Kit

$355.24
$244.99
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Basic Setup for Two Door Mounted Taps
  • Aluminum Tank Included - Empty
  • All Tubing and Clamps Included
  • Faucet Wrench for Faucet tightening and cleaning
  • Sanke Style 'D' Couplers for American Kegs

EdgeStar BR2001BL Ultra Low Temp Refrigerator for Kegerator Conversion

$562.59
$399.00
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Temp Range: Low 30's to Mid 40's
  • Casters for easy mobility
  • Store up to a full sized half shell Sankey standard keg.*Does not support use of Coors, Miller rubberized or other oversized kegs.
  • Reversible door
  • UL listed

Kegerator Conversion Kit – Single Tap Draft Beer Keg Refrigerator Setup (CO2 Tank NOT Included)

$211.49
$149.99
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Includes almost all equipment and components you’ll need to turn your fridge into a beer dispenser!
  • Includes: Chrome Faucet, Faucet Knob, 5" Shank, 5' Beer Line (with connectors/washers), US Sankey Keg Coupler (Type D), 5' Air Line (with clamps), Double Gauge CO2 Regulator & Tap Soother/Faucet Cap.
  • The included US Sankey (D system) coupler fits most domestic (USA) kegs.
  • Can be used with any refrigerator that can fit a keg. Easy to install in less than 30 minutes (Detailed instructions included)
  • You'll just need a CO2 tank with CGA 320 valve, and a keg of your favorite beer!

Kegco Low Profile Door Mount Kegerator Kit w/ 5lbs Tank – EBLPSCK-5T

$302.22
$207.00
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Dual Gauge Regulator packed with premium features! The chrome plated brass body has a large pressure adjustment knob for easy use, and includes both a manual pressure release valve and an integral tamper-proof safety pressure relief valve that releases at 45-psi.
  • LOW PROFILE KEG COUPLER: This 2-3/8" tall Low Profile "D" System Keg Coupler is compatible with all domestic brand American "D" system Sankey kegs and is easy to use - simply push down and turn to couple the keg. This coupler features a 304 stainless steel construction, a 3/16" I.D. beer outlet barb, and a 5/16" I.D. gas input barb. A 55-psi pressure relief valve allows over-pressurized gas to escape before it can enter your keg.
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
  • HEAVY DUTY FAUCET WRENCH: Make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them.
  • INCLUDES 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.

Kegco Standard Door Mount Kegerator Conversion Kit with 10 lb. Co2 Tank – SCK-10T

$292.89
$201.99
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • PRO SERIES DOUBLE GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Dual Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
  • LEVER HANDLE D SYSTEM KEG COUPLER: This NSF-approved Kegco KT85D-L Commercial Grade Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape.
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
  • METAL BEER FAUCET WRENCH: This conversion kit comes complete with a metal beer faucet spanner wrench, an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucet. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.
  • 10 LB. ALUMINUM CO2 TANK: This kit comes with a brand new 10 lb. CO2 cylinder produced from high strength aluminum alloy 6061-T6, which is not as heavy as steel tanks and will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Features a carrying handle.

EdgeStar KC2000 Full Size Kegerator and Keg Beer Cooler

$619.08
$469.00
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Holds US Standard 1/4 and 1/2 Kegs. Does NOT support use of Coors, Miller, rubberized or other oversized kegs
  • Temp Range: Low 30's to Mid 40's
  • Easy conversion to a refrigerator
  • 5 lbs CO2 cylinder included (supplied empty)
  • Dimensions: 48 1/2 x 20 1/10 x 24 13/16 (height includes the draft tower), Warranty: 90 days labor, 1 year parts

Kegco BF S1PK-5T Standard Party Beer Dispenser Keg Tap Kit, Black

$268.05
$192.84
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Standard Party Kegerator Kit is the easy solution to having a kegerator in without have to drill
  • Premium Pro Series Double Gauge Co2 Regulator and New 5lb Aluminum Co2 Tank
  • D System Lever Handle Keg Coupler comes with 2 Feet of Beer Line with Picnic Faucet
  • Please Note: Beverage Factory is the only reseller of genuine Kegco products on Amazon
  • Home brew Kits and accessories

Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)

$88.39
$64.99
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Great for turning a chest freezer into a keg refrigerator
  • Easy to set up and use
  • Plug unit into wall and then run the sensor into your freezer
  • Very economical

Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control

$47.60
$35.00
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
  • [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
  • [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
  • [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.

Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator

$49.00
$35.00
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Easily calibrated.
  • Can display in Centigrade or Fahrenheit.
  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

$109.15
$82.69
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating
  • The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
  • USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation
  • Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter
  • 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern)

Kegerator Tower Cooler for Beer Tower – Neoprene Design – Perfect Fit for Kegerator Tap Tower – Easy to Use Beer Tower Cooler Accessory (3.0" Diameter x 11.5" Height Double Tap Beer Tower)

$25.99
$19.99
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • MAINTAINS ICY COLD BEER TOWERS: Ensure that every pour from your draft beer tower comes out icy cold. Even the first! Insulate your tower with this simple to use kegerator Tower Cooler accessory.
  • END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Tower Cooler Chiller. Beer warms rapidly through a poorly insulated beer tower causing foam to form…in your cup!
  • SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Tower Chiller will reduce kegerator energy consumption.. Unlike kegerator tower cooler fans, the Tower Chiller takes seconds to install.
  • MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator and protect your beer tower.
  • HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers.

BACOENG A Tap Door Mount Kegerator Conversion Kit No Tank

$191.09
$129.99
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • DUAL GAUGE REGULATOR: This unit weighs about 3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
  • HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
  • METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets.

Kegco Draft Beer Tower Rebuild Kit

$51.95
$35.34
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Chrome Beer Faucet with Brass Lever
  • Chrome Elbow Shank Assembly
  • 5 Feet of 3/16" I.D. (7/16" O.D.) Clear Beer Line with hex nut assembly
  • 3/16" Stainless Worm Drive Clamp
  • Neoprene Coupler Washer

Interdynamics Certified A/C Pro R-12 to R-134a Retrofit Valve 7/16" Low Side Port

$14.62
$9.81
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Professional grade retrofit valve adaptor for automotive air conditioning systems converting from R-12 to R-134A
  • For 7/16 inch low side port
  • Includes dust cap and retrofit label
  • Fits all vehicles pre-1994
  • Works with R-134a refill fittings ›

Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000

Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Single Tap Stainless Steel Conversion Kit (US Sankey Coupler w/5lb CO2 Tank)

$245.04
$188.49
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Contains everything you need to convert a fridge into a kegerator.
  • Includes US Sankey keg coupler for dispensing most domestic beers.
  • All parts that come into contact with beer are made of stainless steel.
  • Easy to assemble.
  • CO2 Tank is not filled.

HomeBrewStuff Add A Tap Draft Beer Kegerator Conversion Kit 1CH-D

$72.79
$55.99
Go to amazon
Amazon.com
as of April 8, 2020 1:24 am

Features

  • Add a Tap Kit comes with beer parts you will need to successfully add an additional tap
  • Chrome Beer Faucet with Brass Lever and 4 1/8" Long Chrome Beer Shank
  • Includes 5 Feet of 3/16" ID Beer Line Assembly
  • Chrome plated 4-1/2" Long Shank with Nipple
  • Includes 5 Feet of 5/16" X 9/16 Gas Tubing and Clamps